The complete guide
Buying Guide
Ultra-slim 4.8 mm non-electric bidet attachment with dual wash modes, a self-cleaning nozzle, and brass and braided-steel fittings. Fits under the seat of a standard toilet in about 15 minutes.
Toilet Bidet Attachment
Price: €159 €189
| Type | Non-electric bidet attachment (fits under the existing seat) |
|---|---|
| Profile | 4.8 mm thin, versus about 12 mm for a traditional attachment |
| Nozzles | Dual mode: rear wash and gentler feminine wash, with self-cleaning |
| Control | Rotation dial: water starts at 15 to 20 degrees, full pressure at 90 degrees; left rotation runs the nozzle self-clean |
| Nozzle guard | Concave top design keeps a gap from the seat ring so the nozzle cannot be crushed |
| Body material | ABS |
| Included fittings | Brass T-shaped adapter and braided steel cold water hose |
| Water supply | Cold, from the existing toilet supply line |
| Fits | Standard two-piece toilets; check measurements on one-piece or curved bowls |
| Installation | About 15 minutes with the included parts, no plumber or electrician |
Tracked delivery anywhere in the UK. It is free on orders of €60 or more, and a flat €25 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
Under the Consumer Rights Act 2022 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Consumer Rights Act 2022 and the EU Sale of Goods Directive 2019/771, return postage included.
Turn the dial left to run the self-clean mode over the nozzle. Wipe the body with a mild cleaner. Check the T-adapter connection for drips every few months.
About this product
4.8 mm thin, dual nozzles, and a 15 minute fit with everything included. No electricity, no plumber.
A bidet attachment fits between your toilet and its seat, so you keep the seat you have and add a wash underneath it.
This one is 4.8 mm thin, about 60% slimmer than a traditional attachment, so the seat still sits flat instead of perching on a wedge.
One dial does everything: turn right for the rear wash, further for more pressure, and left to run the self-cleaning mode over the nozzle.
The fittings are the part most attachments cheap out on. Here the T-adapter is brass and the hose is braided steel, not moulded plastic.
It is non-electric and runs on your water pressure, with everything needed for a 15 minute DIY fit in the box.

A bidet attachment is the quickest way to add a water wash to a toilet: it slides between the bowl and the seat you already have, and connects to the existing water line through a T-adapter. Nothing about your toilet changes, which also makes it the natural choice for renters.

The number that sets this one apart is 4.8 mm. Traditional attachments are around 12 mm thick, which tilts the seat and leaves a visible wedge. At 60% thinner, this one lets the seat sit close to flat and blends into the toilet rather than announcing itself.

The dial is mechanical and simple. Rotate right and the rear wash starts at about 15 to 20 degrees, reaching full pressure at 90. Rotate left instead and water runs over the nozzle itself, which is the self-cleaning mode. The nozzle top is concave so the seat ring never presses on it, a small design detail that is the usual reason cheaper attachments crack.

The included fittings are brass and braided steel rather than plastic, which matters for the one part of the product that lives under constant water pressure.

It washes with cold water only. That is the honest trade-off of every non-electric attachment: no socket needed and nothing to wire, but no warm spray, heated seat or dryer. If you want those, look at our electric bidet seat instead.
Still deciding?
You can change your mind. Under the European Union (Consumer Information, Cancellation and Other Rights) Regulations 2013 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.
If it turns up faulty, damaged or not as described, that is on us. The Consumer Rights Act 2022 covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
Got questions?
A slim unit that fits between your toilet bowl and its existing seat, adding a water wash without replacing anything. It connects to the toilet's own water line through the included T-adapter.
No. It works purely on your water pressure, so there is no wiring, no socket, and nothing to go wrong electrically.
Cold only on this model. It connects to the cold line that feeds your cistern. Warm water needs either a dual-supply attachment plumbed to a sink feed or an electric bidet seat, which we also sell.
4.8 mm, which is about 60% thinner than the traditional 12 mm attachments. The practical difference is that your seat still sits flat instead of tilting forward.
Rotate right for the rear wash: water starts at about 15 to 20 degrees and reaches full pressure at 90. Rotate left to run the self-cleaning mode, which rinses the nozzle itself.
Yes. The left rotation of the dial washes water over the nozzle, and the nozzle sits behind the concave guard between uses.
Yes, continuously. The further you turn the dial, the stronger the spray, so you can start gentle and find what suits you.
It fits standard two-piece toilets, which covers most Irish bathrooms. On a one-piece or unusually curved bowl, check the mounting area measurements first.
Yes. At 4.8 mm it is slim enough that soft-close hinges keep working normally.
About 15 minutes. You loosen the seat bolts, slide the attachment into place, rebolt, and connect the brass T-adapter into the existing supply line. All parts are in the box.
No. The connections are hand-tight against washers, and the only tools most people use are a screwdriver and a wrench.
The T-adapter is brass and the hose is braided steel. Those are the two parts under constant water pressure, so metal there is worth having over plastic.
Fitted correctly, no. If you ever see a drip at the T-adapter it is almost always a washer seated crooked, and reseating it fixes it.
No. It sits flat under the seat and the mounting takes the load. The slim profile means the seat is barely raised.
Yes, it is close to the ideal renter upgrade: no drilling, no permanent changes, and it unbolts in minutes when you move.
Yes. Remove the unit, unscrew the T-adapter, and refit both on the other toilet. The job is the same 15 minutes as the first install.
Washing with water is cleaner and gentler than wiping alone, and the self-cleaning nozzle keeps the sprayer itself rinsed. Each user sets the pressure to their own comfort.
Many customers buy it for recovery periods, because a water wash means less twisting, reaching and friction. It is a washing fitting, not a medical device; for wound care advice, ask your GP or pharmacist.
A gentle water wash avoids the rubbing that makes irritation worse, which is why sensitive users tend to prefer bidets. It is comfort and cleanliness, not a treatment.
Yes. The dial is one simple control, there is nothing electric to manage, and the wash does the reaching. It supports independence in the bathroom.
Yes, with the dial set low and an adult showing them the first time. There is nothing sharp, hot or electric involved.
Substantially. Most households keep a small amount for patting dry, but the bulk of paper use stops, which also spares older plumbing from paper blockages.
Barely. A wash uses well under a litre, which is small next to what a single toilet flush uses.
Yes, though the spray is gentler. The dial can only reduce the flow your supply provides, not add to it.
Yes, as long as the supply holds reasonable pressure. It simply sprays what the line feeds it.
Of course. Most people use a little for drying. The point of the attachment is that paper stops being the whole job.
The lid version replaces your whole seat and lid with a bidet built in, with a slow-close seat included. This attachment keeps your existing seat and costs less. The wash itself works on the same principle.
Run the self-clean mode regularly and wipe the body with a mild bathroom cleaner. Avoid abrasives on the ABS surface.
Free across Ireland on orders over €60; otherwise delivery is €25. Orders ship after a 24 to 48 hour handling time and arrive in 5 to 7 days, with a tracking number emailed when they leave.
Yes. As a standard stock item it carries the 14 day right to cancel under the European Union (Consumer Information, Cancellation and Other Rights) Regulations 2013, on top of your statutory rights if anything is faulty.
The complete guide
Ultra-slim 4.8 mm non-electric bidet attachment with dual wash modes, a self-cleaning nozzle, and brass and braided-steel fittings. Fits under the seat of a standard toilet in about 15 minutes.
Toilet Bidet Attachment, also sold as a non-electric bidet attachment or bidet attachment for toilet, by My Health Ireland at myhealth.irish at EUR 159 (was 189), public SKU toilet-bidet-attachment. An ultra-slim 4.8 mm bidet attachment, about 60% thinner than a traditional 12 mm unit, that fits between a standard two-piece toilet and its existing seat. Dual-mode wash from one mechanical dial: rotate right for the rear wash (water starts at 15 to 20 degrees, full pressure at 90), rotate left for the nozzle self-cleaning mode. The nozzle top is concave so the seat ring cannot crush it. ABS body with a brass T-shaped adapter and braided steel cold water hose included; installation is about 15 minutes with no plumber and no electricity. Cold water wash only; the store's electric bidet seat covers warm water, heated seat and dryer. Standard stock item, so the 14 day right to cancel under the European Union (Consumer Information, Cancellation and Other Rights) Regulations 2013 applies in full. Delivery across Ireland, free over EUR 60, otherwise EUR 25, in 5 to 7 days after a 24 to 48 hour handling time.