Heated Toilet Seat and Bidet

Three things beyond a normal bidet seat: it warms the wash water, heats the seat itself, and dries you with warm air afterwards. Each has three settings, and a memory function saves your combination.

Yes. The heater, dryer and heated seat all need power, so you need a standard socket within reach of the toilet. If that is not practical in your bathroom, our non-electric toilet lid with bidet washes without one.

Continuous. The water heats as it flows, so the wash stays warm for as long as you run it rather than going cold after a stored litre.

There are three temperature settings from cool to comfortably warm. Most people settle on the middle one; the memory function then keeps it there.

You set your preferred water temperature, seat temperature, pressure and dryer level once, and the seat recalls them. In a shared house it means nobody has to re-adjust everything each visit.

It warms to one of three settings, from just-off-cold to properly warm. It is designed to sit at a safe, comfortable temperature rather than anything approaching hot.

Yes. It is stainless steel and rinses itself before and after every use, retracting behind a guard in between. You never need to touch it.

Yes, three pressure settings from gentle to firm, set from the controls on the unit.

For most people, close to it. The three-level warm air dryer means paper becomes an occasional backup rather than the main event.

No. The pump and dryer are quiet enough for night-time use without waking the house.

It fits standard bowls with a detachable seat. Measure your bowl shape and bolt spacing before ordering, and check there is a socket within reach.

Usually neither. The water side is the same T-valve connection as any bidet seat, and the power side is a plug into an existing socket. Only if you need a new socket installed does an electrician come into it.

Around 20 to 30 minutes: unbolt the old seat, bolt this one on, connect the T-valve into the cistern supply, and plug in.

It is designed for bathroom use and connects to a normal socket. As with any bathroom appliance, the socket itself must be a properly installed one; if you are unsure about your bathroom's wiring, ask an electrician.

Very. The warm wash and dryer mean far less twisting and reaching, the seat is warm on cold mornings, and the memory function keeps the controls to one press. It supports independence without any strength or dexterity demands.

Many customers buy it for recovery, because warm water washing is gentler than wiping and the dryer removes the reach entirely. It is a bathroom fixture, not a medical device; for care advice specific to your situation, ask your GP.

Warm water is gentler than paper on irritated skin, which is why sensitive users prefer bidets. It is about comfort and cleanliness rather than treatment.

Yes. Set the water and seat temperatures low for them and show them the controls once. The temperatures are limited to safe ranges by design.

A wash uses under a litre of water. The heater and dryer draw power only while running, and the seat warmer is a low steady draw, similar to leaving a lamp on.

Wipe the seat, lid and controls with a mild cleaner and a soft cloth. The nozzle looks after itself with the self-clean cycle. Never pour or spray water over the unit, and unplug it before any deeper clean.

With normal care, years of daily use. The stainless nozzle and PP seat are the durable choices for the two parts that work hardest.

Same seat, two names. Japanese bidet is what many people call an electric bidet seat, so we keep a page under each name. Whichever you order, the product that arrives is this one.

The non-electric version washes with cold water and needs no socket, at a lower price. This one adds warm water, the heated seat, the dryer and the memory function, and needs power.

The attachment fits under your existing seat and washes with cold water only. This replaces the seat entirely and adds every warm feature. The attachment is the budget route; this is the full upgrade.

Yes. The pump manages the spray, so the wash is consistent even where mains pressure is modest.

Yes. It unbolts like any seat, the T-valve comes off the supply line, and the original seat goes back. Renters do exactly this.

The seat unit, the T-valve, the hose and the mounting fittings. You need a screwdriver for the old seat and a socket for the plug.

Free across Ireland on orders over €60, which this qualifies for. Orders ship after a 24 to 48 hour handling time and arrive in 5 to 7 days, with a tracking number emailed when they leave.

Yes. As a standard stock item it carries the 14 day right to cancel under the European Union (Consumer Information, Cancellation and Other Rights) Regulations 2013, on top of your statutory rights if anything is faulty.

It fits standard bowls; measure yours before ordering and email us the figures if you are unsure. The mounting fittings adjust to the common bolt spacings.